Ports

Left to Right as pictured above Integrated 6-pin 1B Anglissimo Lemo Cable - DJI TX This cable feeds 8-17V power to the TX, plus sends and receives data between Fusion Hub and the DJI TX 6-pin 0B Lemo port - DC IN This 6-pin 0B 'J' port actually does more than just take a 8-17V power input, it also has data pins for CANBUS to talk to DJI gimbals: Ronin 2, RS3 Pro and RS4 Pro! 5-pin 0B Lemo port - MōVI Pro/XL Serial Data port This port enables data connection with MōVI Pro/XL, Basecam Systems and TORQ Head. For MōVI Pro/XL, we have two length cables, both are included with Fusion Hub MōVI or Complete Packs IG.100555 - Control Cable ‣ FUSION HUB to MōVI - 12-inch / 30cm

IG.100556 - Control Cable ‣ FUSION HUB to MōVI - 35-inch / 90cm If you need a spare of these, please reach out to [e-mail] For TORQ, we are finalising a nice right angle AUXIO cables to sell in a Fusion Hub - TORQ Pack. Get in touch if you need a cable for Basecam Systems made, or we can assist you modifying the MōVI cables for use with Basecam.

7-pin 0B Lemo port - TILTA output Can be used for power and control of Nucleus-M, M2, Nano II (via breakout) FIZ motors, as well as with Servo Link. This port is protected from >17V return, which can happen if you are using the Tilta 3-pin Fischer R/S cable from a camera that has 24V power output on it's Fischer port! Our standard 7-pin lemo cable that ships with Fusion Hub is 30-inch / 76cm (IG.100559) You can also use any Tilta 7-pin to 7-pin lemo cables you have from your Nucleus-M or M2 kits! This port is also takes power and data to Servo Link, using the short cable (IG.100580) included with Servo Link.