Ports

5-pin 0B Lemo port Underneath CANBUSTER, is the 5-pin lemo port where you plug in the CANBUSTER end of the cable. Control Cable ‣ NODO Inertia Wheels to CANBUSTER is available in 3 lengths: Standard is IG.100465: 24-inch / 60cm Longer is IG.100466: 8ft / 2.4m Custom is available up to 330ft / 100m length, via email

Pogo pins on the rear of CANBUSTER These interface with the DJI High-Bright monitor cage, either side. This passes power from the monitor to CANBUSTER and data between them.

Inertia Wheels ports (left to right as pictured) TX SUB-GHZ (RP-SMA antenna) 3rd Axis (7-pin 0B Lemo) AUX (9-pin 0B Lemo) MAIN USB (micro USB) HARDWIRE (Molex) PWR 10-35V (8-pin 1B Lemo) RX 2.4GHZ (RP-SMA antenna) For CANBUSTER, we utilise the AUX 9-pin port for data to/from the wheels. Be careful to not plug the 9-pin lemo into the 7-pin 3rd Axis port!