Mounts

Cheese Block Mounted to the back of Control Deck, you will find the Cheese Block. Designed for solid mounting to light stand or other baby pin (5/8" / 16mm) and hex pin spigots.

If you're not running the Pro-Workflow monitor mount, then use the top ¼”-20” or ⅜"-16” threaded holes with Pin-Locks to mount a monitor arm. If not using a stand, you can mount an Arca Swiss or similar tripod plate to the ¼”-20” or ⅜"-16” threaded holes underneath. This may not work, depending on battery plate choice.

Pro-workflow Monitor Mount