> For the complete documentation index, see [llms.txt](https://ignitedigi.gitbook.io/ignite-digi-wiki/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://ignitedigi.gitbook.io/ignite-digi-wiki/home/control-ecosystem-manual/product-manuals/control_deck_manual/menu-when-controlling-torq-head-titan-lt.md).

# Menu when controlling: TORQ Head, Titan LT

Control Deck remembers it's previous settings when power cycling, or you reconnect to a device type.\
**Example:** Going between 4D and Ronin 2, any 4D specific settings will be remembered for when you connect back to it.

{% hint style="warning" %}

### **Fusion Hub setting must be turned ON in Control Deck menu, for** TORQ Head, Titan LT control

{% endhint %}

{% hint style="warning" %}

### **Fusion Hub must be on the TORQ/Titan LT firmware for Fusion Hub!  CLICK HERE**

{% endhint %}

<table data-full-width="false"><thead><tr><th width="197.640625">MENU ITEM</th><th width="160.07421875">OPTIONS</th><th>DESCRIPTION</th></tr></thead><tbody><tr><td><strong>Exit Menu</strong></td><td>-</td><td>You can quickly exit the menu at anytime, by holding MENU/SETUP button (second from right)</td></tr><tr><td><strong>Joystick Expo</strong></td><td><strong>L / 2 / 3</strong></td><td><img src="https://cdn.shopify.com/s/files/1/1605/3439/files/Control_Deck_Curve_Chart_V4a_600x600.jpg?v=1721107081" alt="" data-size="original"></td></tr><tr><td><strong>Joystick Fn</strong></td><td><strong>Twist: On/Off</strong><br><strong>Button: On/Off</strong></td><td>Enable or Disable the Twist Axis or Button on the Joystick. <br><br>Twist setting <em>ON</em> is not overridden by <em>Roll Speed OFF</em></td></tr><tr><td><strong>PTR Direction</strong></td><td><strong>Axis: P/T/R</strong><br><strong>Invert: Off/On</strong></td><td>Toggle the control direction for Pan, Tilt and Roll axis.<br><br>Shortcut for toggling <strong>Tilt Axis</strong> <strong>direction</strong> is still long hold on Joystick Button (in most modes), unless button is turned off in <strong>Joystick Fn</strong> (above)</td></tr><tr><td><strong>Roll Speed</strong></td><td><strong>Off</strong> / <strong>L  /  M  /  H</strong></td><td><strong>Off :</strong> Disable roll input on Joystick or Rocker.<br>Roll Trim will ALWAYS remain available!<br><br><strong>L:</strong> Low<br><br><strong>M:</strong> Medium<br><br><strong>H:</strong> High</td></tr><tr><td><strong>Zoom/Roll Swap</strong></td><td><strong>Normal / Swapped</strong></td><td><strong>Normal</strong> is Zoom on Rocker, Roll on Twist.<br><br><strong>Swapped</strong> is Roll on Rocker, Zoom on Twist</td></tr><tr><td><strong>Focus Knob Cal.</strong></td><td><strong>Calibrate</strong></td><td>This calibrates the focus knob on the Control Deck, not the FIZ motors!<br><br>Turn the Focus Knob to each end gently until it says <em>Complete.</em><br><br>You may find it says Complete after just a partial movement, this is because it's tracking the endpoints in the background even when you're not in the menu. <br><br>It will only calibrate for the full range of the knob.</td></tr><tr><td><strong>Shake Mode</strong></td><td><strong>1 / 2 / 3</strong></td><td>Change the shake algorithm</td></tr><tr><td><strong>Shake On Move</strong></td><td><strong>On / Off</strong></td><td><strong>On:</strong> Shake will continue on all axes, regardless of joystick input.<br><br><strong>Off:</strong> Shake will only be on axis that are not getting input from joystick, once input from joystick stops that axis will ease into shake again.</td></tr><tr><td><strong>Shake Axis</strong></td><td><strong>Axis: P / T / R</strong><br><strong>Shake: On / Off</strong></td><td>Enable or disable shake on each axis:<br><strong>Pan / Tilt / Roll</strong></td></tr><tr><td><strong>R2 User Profile</strong></td><td><strong>1 / 2 / 3 / 4 / 5</strong></td><td><strong>1:</strong> Dual Op<br><strong>2:</strong> Majestic Pan + Roll (Remote Tilt)<br><strong>3:</strong> Kill motors<br><strong>4:</strong> Majestic Roll (Pan + Tilt remote)<br><strong>5:</strong> Majestic Pan + Tilt + Roll (no remote)<br><br><em>A long press of <strong>MODE</strong> button on Control Deck will cycle between Dual Op and</em> Majestic Pan + Roll (Remote Tilt) <em>Modes on MōVI Pro / XL</em><br><br><em>A long press of <strong>CLEAR MARK</strong> button on Control Deck will cycle between Kill gimbal motors and Dual Op Modes on MōVI Pro / XL</em></td></tr><tr><td><strong>Fusion Hub</strong></td><td><strong>Off / On</strong></td><td><strong>Off:</strong><br>If no Fusion Hub is in line, ensure you have this setting to off.<br>If you have it set to <strong>On</strong> but have no Fusion Hub in line, you will get erratic gimbal movements.<br><br><strong>On:</strong> <br>For use when you have Fusion Hub on the DJI TX. <br>See below for the new menu items that appear when this setting is On.</td></tr></tbody></table>

#### Fusion Hub ON adds the following menu items

<table><thead><tr><th width="181.6328125">MENU ITEM</th><th width="177.7109375">OPTIONS</th><th>DESCRIPTION</th></tr></thead><tbody><tr><td><strong>Focus Curve</strong></td><td><strong>25% / 50% / 75%</strong></td><td><img src="/files/LgxQDTPNwG1WiYHseRsX" alt=""><br><br>Gives you the ability to offset the focus mapping for more precision at one end of the lens' focus range.<br><br>Similar to Near/Far setting on your Canon/Fujinon focus demand.<br><br>Works with Nucleus-M, M2, Nano II, MōVI motors and Servo lenses. </td></tr><tr><td><strong>Fusion Focus</strong></td><td><strong>Dir. : CW / CCW</strong><br><strong>Torque : L / M / H</strong></td><td><p><strong>Dir.</strong></p><p><strong>CW / CWW:</strong> Change the direction of the motor relative to the focus knob<br></p><p><strong>Torque</strong><br><strong>L / M / H:</strong> Set the motor torque for the Focus motor. <br><em>*not applicable when using Servo lens</em></p></td></tr><tr><td><strong>Fusion Iris</strong></td><td><strong>Dir. : CW / CCW</strong><br><strong>Torque : L / M / H</strong></td><td><p><strong>Dir.</strong></p><p><strong>CW / CWW:</strong> Change the direction of the motor relative to the iris knob<br></p><p><strong>Torque</strong><br><strong>L / M / H:</strong> Set the motor torque for the Focus motor. <br><em>*not applicable when using Servo lens</em></p></td></tr><tr><td><strong>Fusion Zoom A</strong></td><td><strong>Dir. : CW / CCW</strong><br><strong>Torque : L / M / H</strong></td><td><p><strong>Dir.</strong></p><p><strong>CW / CWW:</strong> Change the direction of the motor relative to the zoom rocker<br><em>*not applicable when using Servo lens</em><br><br><strong>Torque</strong><br><strong>L / M / H:</strong> Set the motor torque for the Focus motor. <br><em>*not applicable when using Servo lens</em></p></td></tr><tr><td><strong>Fusion Zoom B</strong></td><td><strong>Speed : L / M / H</strong><br><strong>Damping : L / M / H</strong></td><td><strong>Speed</strong><br><strong>L / M / H:</strong> Set the maximum speed of the zoom.<br><br><strong>Damping</strong><br><strong>L / M / H:</strong> Set the amount of damping, to help ease in and out of zooms</td></tr><tr><td><strong>MōVI Motor Type</strong> </td><td><strong>0 - 7</strong><br>(in 1 step increments)</td><td><p>Allows you to change the motor type setting on MōVI Pro/XL to match the motors you are using. <br></p><p><strong>0: Redrock Torque/SLS motor</strong><br><strong>1: Heden M26</strong><br><strong>2: Heden M21</strong><br><strong>3: Hocus Axis1</strong><br><strong>4: Hocus Reflex</strong><br><strong>5: Chrosziel100</strong><br><strong>6: Custom1</strong><br><strong>7: Custom2</strong></p></td></tr><tr><td><strong>Iris Control</strong></td><td><strong>Iris / ND</strong></td><td>Change the mapping of iris knob between iris and VND when using Tilta Nucleus M, M2 or Nano II motors.<br><strong>Iris</strong> (motor 2)<br><strong>ND</strong> (motor 4)</td></tr><tr><td><strong>FIZ Handoff</strong></td><td><strong>FIZ / FI / F / I</strong></td><td>Use this setting to hand off FIZ axis to the Tilta Hand Unit connected to FIZBUSTER (standalone or rear port of Control Deck)<br><br><strong>FIZ: Focus, Iris and Zoom</strong><br><br><strong>FI: Focus and Iris (Control Deck still has Zoom)</strong><br><br><strong>F: Focus (Control Deck still has Iris and Zoom)</strong><br><br><strong>I: Iris (Control Deck still has Focus and Zoom)</strong></td></tr><tr><td><strong>Servo Link</strong></td><td><strong>FIZ / FZ</strong></td><td>Allows you to control iris on Servo lenses, or to relinquish iris control to the camera, for auto iris or CCU control.<br><br><strong>FIZ:</strong> You will have Focus, Iris and Zoom on Control Deck<br><br><strong>FZ:</strong> You will have Focus and Zoom on Control Deck</td></tr><tr><td><strong>PTR/Zoom Ratio</strong></td><td><strong>1:1 - 1:25</strong><br>(in 1 step increments)</td><td>Also known as Zoom scaling, it allows you to set a ratio of how much the pan/tilt/roll axis speeds will lower relative to the zoom position of the lens.<br><br><strong>Example:</strong> Canon 17-120mm, try <strong>7:1</strong> setting. <br>As you zoom in, Control Deck will adjust the axis speeds for a consistent feel and look.</td></tr><tr><td><strong>FIZ Calibrate</strong></td><td><strong>Calibrate</strong></td><td>Remotely trigger calibrate on Nucleus-M, M2, Nano II or MōVI FIZ motors. <br><br>If the motors have recently completed a calibration, then this may not work.</td></tr></tbody></table>