# Cable setup - Ronin 2

### Transmitter ONLY

**Required:**\
6-pin male to 6-pin Female 1B Lemo cable from DJI or Ignite Digi.\
Power and data.\
\
DJI High-Bright combo includes 1 x straight male to straight female cable which can be used.\
\
We sell a [10" cable straight to right angle](https://www.ignitedigi.com.au/products/controlcable-ronin2-masterwheels-to-dji-transmission) (IG.100391, pictured below) which works really nicely for TX mounted to [R2 Accessory mounts](https://www.ignitedigi.com.au/products/accessory-mounts-for-ronin2).<br>

<figure><img src="https://www.ignitedigi.com.au/cdn/shop/products/DJITransmission001b.jpg?v=1737426655&#x26;width=1445" alt=""><figcaption></figcaption></figure>

***

### Focus Pro LiDAR Hub

Use [IG.100539](https://www.ignitedigi.com.au/products/controlcable-ronin2-to-dji-focus-pro-lidar-hub) cable to run from Ronin 2 Power Hub to the 7-pin 0B Lemo port on the side of the Focus Pro LiDAR Hub. \
This passes 14.4V power from the Ronin 2 to the LiDAR Hub/Transmission and control data back to the Ronin 2.<br>

<figure><img src="https://cdn.shopify.com/s/files/1/1605/3439/files/Control_Deck_Flow_Diagram_Ronin_2_with_FP_LiDAR_Hub.png?v=1726712471" alt=""><figcaption></figcaption></figure>

***

### RS LiDAR Hub

Use [IG.100474](https://www.ignitedigi.com.au/products/controlcable-dji-rs-lidar-hub-to-ronin2) cable to run from Ronin 2 Power Hub to the USB-C port on the side of the RS LiDAR Hub. This passes control data from LiDAR Hub/Transmission to the Ronin 2.\
\
To power, plug the D-tap of the LiDAR Hub into the R2->D-tap splitter that DJI include with the Ronin 2.<br>

<figure><img src="https://cdn.shopify.com/s/files/1/1605/3439/files/Control_Deck_Flow_Diagram_Ronin_2_with_RS_LiDAR_Hub.png?v=1726712451" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://ignitedigi.gitbook.io/ignite-digi-wiki/home/control-ecosystem-manual/product-manuals/control_deck_manual/cable-setup-ronin-2.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.