# Ports

<figure><img src="https://cdn.shopify.com/s/files/1/1605/3439/files/CANBUSTER_Banner_006.jpg?v=1725408526" alt=""><figcaption></figcaption></figure>

**5-pin 0B Lemo port**\
Underneath CANBUSTER, is the 5-pin lemo port where you plug in the CANBUSTER end of the cable.\
\
Control Cable ‣ NODO Inertia Wheels to CANBUSTER is available in 3 lengths:\
Standard is [IG.100465](https://www.ignitedigi.com.au/products/control-cable-nodo-inertia-wheels-to-canbuster?variant=46068117700901): 24-inch / 60cm\
Longer is [IG.100466](https://www.ignitedigi.com.au/products/control-cable-nodo-inertia-wheels-to-canbuster?variant=46068117733669): 8ft / 2.4m\
Custom is available up to 330ft / 100m length, **via** **email**&#x20;

<figure><img src="https://cdn.shopify.com/s/files/1/1605/3439/files/Control_Cable_NODO_Inertia_Wheels_to_CANBUSTER_02.jpg?v=1694654973" alt=""><figcaption></figcaption></figure>

<figure><img src="https://cdn.shopify.com/s/files/1/1605/3439/files/CANBUSTER_for_Inertia_Wheels_002a.jpg?v=1694654956" alt=""><figcaption></figcaption></figure>

**Pogo pins on the rear of CANBUSTER**\
These interface with the DJI High-Bright monitor cage, either side.\
This passes power from the monitor to CANBUSTER and data between them.<br>

<figure><img src="/files/ulxN4E1W39yIBgWAdwmX" alt=""><figcaption></figcaption></figure>

**Inertia Wheels ports (left to right as pictured)**\
TX SUB-GHZ (RP-SMA antenna) \
3rd Axis (7-pin 0B Lemo) \
**AUX (9-pin 0B Lemo)**\
MAIN USB (micro USB)\
HARDWIRE (Molex)\
PWR 10-35V (8-pin 1B Lemo)\
RX 2.4GHZ (RP-SMA antenna) \
\
For **CANBUSTER**, we utilise the **AUX 9-pin port** for data to/from the wheels.

{% hint style="warning" %}
Be careful to **not** plug the 9-pin lemo into the 7-pin **3rd Axis** port!
{% endhint %}


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://ignitedigi.gitbook.io/ignite-digi-wiki/home/control-ecosystem-manual/product-manuals/canbuster_manual/ports.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.